D-Link DXS-3326GSR - Page 299

DXS-3326GSR Stackable Gigabit Layer 3 Switch
DXS-3326GSR:4#disable dnsr
Command: disable dnsr
Success.
DXS-3326GSR:4#
Example Usage:
To disable cache lookup for DNS relay.
DXS-3326GSR:4#disable dnsr cache
Command: disable dnsr cache
Success.
DXS-3326GSR:4#
Example Usage:
To disable static table lookup for DNS relay.
DXS-3326GSR:4#disable dnsr static
Command: disable dnsr static
Success.
DXS-3326GSR:4#
show dnsr
Purpose Used to display the current DNS relay status.
Syntax
show dnsr {static}
Description This command is used to display the current DNS relay status.
Parameters
static − Allows the display of only the static entries into the DNS
relay table. If this parameter is omitted, the entire DNS relay table
will be displayed.
Restrictions None.
Example Usage:
To display DNS relay status:
291