DXS-3326GSR Stackable Gigabit Layer 3 Switch
Example usage:
To disable HTTP:
DXS-3326GSR:4#disable web
Command: disable web
Success.
DXS-3326GSR:4#
save
Purpose
Used to save changes in the Switch’s configuration to non-volatile
RAM.
Syntax save [log | all]
Description
This command is used to enter the current switch configuration into
non-volatile RAM. The saved switch configuration will be loaded into
the Switch’s memory each time the Switch is restarted.
Parameters Entering just the save command will save only the Switch configuration
to NV-Ram
log – Entering the log parameter will save only the log file to NV-RAM.
all - Entering the all command will save both the log file and the Switch
configuration to NV-RAM.
Restrictions
Only administrator-level users can issue this command.
Example usage:
To save the Switch’s current configuration to non-volatile RAM:
DXS-3326GSR:4#save
Command: save
Do you want to change current box id from AUTO mode to STATIC
mode? (y/n) n
Saving all configurations to NV-RAM… Done.
DXS-3326GSR:4#
reboot
Purpose
Used to restart the Switch.
Syntax reboot
22
To Next Page
Loading...
