D-Link DXS-3326GSR - Page 303

DXS-3326GSR Stackable Gigabit Layer 3 Switch
DXS-3326GSR:4#enable rip
Command: enable rip
Success.
DXS-3326GSR:4#
disable rip
Purpose Used to disable RIP.
Syntax
disable rip
Description This command is used to disable RIP on the Switch.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example Usage:
To disable rip:
DXS-3326GSR:4#disable rip
Command: disable rip
Success.
DXS-3326GSR:4#
show rip
Purpose Used to display the RIP configuration and statistics for the
Switch.
Syntax
show rip {ipif <ipif_name 12>}
Description This command will display the RIP configuration and statistics for
a given IP interface or for all IP interfaces.
Parameters
ipif <ipif_name 12> − The name of the IP interface for which you
want to display the RIP configuration and settings. If this
parameter is not specified, the show rip command will display
the global RIP configuration for the Switch.
Restrictions None.
Example Usage:
To display RIP configuration:
295