D-Link DXS-3326GSR - Page 324

DXS-3326GSR Stackable Gigabit Layer 3 Switch
show ospf
OSPF Host Route settings
Parameters None.
Restrictions None.
Usage Example:
To show OSPF state:
DXS-3326GSR:4#show ospf
Command: show ospf
OSPF Router ID : 10.1.1.2
State : Enabled
OSPF Interface Settings
Interface IP Address Area ID State Link Metric
Status
------------ ------------------ --------- -------- --------- ---------
System 10.90.90.90/8 0.0.0.0 Disabled Link DOWN 1
ip2 20.1.1.1/8 0.0.0.0 Disabled Link DOWN 1
ip3 30.1.1.1/8 0.0.0.0 Disabled Link DOWN 1
Total Entries : 3
OSPF Area Settings
Area ID Type Stub Import Summary LSA Stub Default Cost
--------------- ------ ----------------------- -----------------
0.0.0.0 Normal None None
10.0.0.0 Normal None None
10.1.1.1 Normal None None
20.1.1.1 Stub Enabled 1
Total Entries : 4
Virtual Interface Configuration
Transit Virtual Hello Dead Authentication Link
Area ID Neighbor Router Interval Interval Status
316