DXS-3326GSR Stackable Gigabit Layer 3 Switch
create ospf area
Restrictions Only administrator-level users can issue this command.
Usage Example:
To create an OSPF area:
DXS-3326GSR:4#create ospf area 10.48.74.122 type normal
Command: create ospf area 10.48.74.122 type normal
Success.
DXS-3326GSR:4#
delete ospf area
Purpose Used to delete an OSPF area.
Syntax
delete ospf area <area_id>
Description This command is used to delete an OSPF area.
Parameters
<area_id> − A 32-bit number in the form of an IP address
(xxx.xxx.xxx.xxx) that uniquely identifies the OSPF area in the
OSPF domain.
Restrictions Only administrator-level users can issue this command.
Usage Example:
To delete an OSPF area:
DXS-3326GSR:4#delete ospf area 10.48.74.122
Command: delete ospf area 10.48.74.122
Success.
DXS-3326GSR:4#
config ospf area
Purpose Used to configure an OSPF area’s settings.
Syntax
config ospf area <area_id> type [normal | stub
{stub_summary [enable | disable] | metric <value 0-65535>}]
Description This command is used to configure an OSPF area’s settings.
Parameters
<area_id> − The OSPF area ID. The user may enter a 32-bit
number in the form of an IP address (xxx.xxx.xxx.xxx) that
318
To Next Page
Loading...
