D-Link DXS-3326GSR - Page 46

DXS-3326GSR Stackable Gigabit Layer 3 Switch
create snmp view
excluded − Exclude this object from the list of objects that an SNMP
manager can access.
Restrictions Only administrator-level users can issue this command.
Example usage:
To create an SNMP view:
DXS-3326GSR:4#create snmp view dlinkview 1.3.6 view_type included
Command: create snmp view dlinkview 1.3.6 view_type included
Success.
DXS-3326GSR:4#
delete snmp view
Purpose Used to remove an SNMP view entry previously created on the
Switch.
Syntax
delete snmp view <view_name 32> [all | <oid>]
Description
The delete snmp view command is used to remove an SNMP
view previously created on the Switch.
Parameters
<view_name 32> − An alphanumeric string of up to 32 characters
that identifies the SNMP view to be deleted.
all − Specifies that all of the SNMP views on the Switch will be
deleted.
<oid> − The object ID that identifies an object tree (MIB tree) that
will be deleted from the Switch.
Restrictions Only administrator-level users can issue this command.
Example usage:
To delete a previously configured SNMP view from the Switch:
DXS-3326GSR:4#delete snmp view dlinkview all
Command: delete snmp view dlinkview all
Success.
DXS-3326GSR:4#
38