D-Link DXS-3326GSR - IP Address Configuration

DXS-3326GSR Stackable Gigabit Layer 3 Switch
show snmp view
Purpose Used to display an SNMP view previously created on the Switch.
Syntax
show snmp view {<view_name 32>}
Description
The show snmp view command displays an SNMP view
previously created on the Switch.
Parameters
<view_name 32> − An alphanumeric string of up to 32 characters
that identifies the SNMP view that will be displayed.
Restrictions None.
Example usage:
To display SNMP view configuration:
DXS-3326GSR:4#show snmp view
Command: show snmp view
Vacm View Table Settings
View Name Subtree View Type
-------------------- ------------------------- ----------
ReadView 1 Included
WriteView 1 Included
NotifyView 1.3.6 Included
restricted 1.3.6.1.2.1.1 Included
restricted 1.3.6.1.2.1.11 Included
restricted 1.3.6.1.6.3.10.2.1 Included
restricted 1.3.6.1.6.3.11.2.1 Included
restricted 1.3.6.1.6.3.15.1.1 Included
CommunityView 1 Included
CommunityView 1.3.6.1.6.3 Excluded
CommunityView 1.3.6.1.6.3.1 Included
Total Entries: 11
DXS-3326GSR:4#
create snmp community
Purpose Used to create an SNMP community string to define the relationship
between the SNMP manager and an agent. The community string
acts like a password to permit access to the agent on the Switch.
One or more of the following characteristics can be associated with
the community string:
An Access List of IP addresses of SNMP managers that are
permitted to use the community string to gain access to the Switch’s
SNMP agent.
An MIB view that defines the subset of all MIB objects that will be
accessible to the SNMP community.
Read-write or read-only level permission for the MIB objects
accessible to the SNMP community.
39