D-Link DXS-3326GSR - Page 49

DXS-3326GSR Stackable Gigabit Layer 3 Switch
Example usage:
To delete the SNMP community string “dlink:”
DXS-3326GSR:4#delete snmp community dlink
Command: delete snmp community dlink
Success.
DXS-3326GSR:4#
show snmp community
Purpose Used to display SNMP community strings configured on the
Switch.
Syntax
show snmp community {<community_string 32>}
Description
The show snmp community command is used to display SNMP
community strings that are configured on the Switch.
Parameters
<community_string 32> − An alphanumeric string of up to 32
characters that is used to identify members of an SNMP
community. This string is used like a password to give remote
SNMP managers access to MIB objects in the Switch’s SNMP
agent.
Restrictions None.
Example usage:
To display the currently entered SNMP community strings:
DXS-3326GSR:4#show snmp community
Command: show snmp community
SNMP Community Table
Community Name View Name Access Right
-------------------------------- -------------------------------- ------------
dlink ReadView read_write
private CommunityView read_write
public CommunityView read_only
Total Entries: 3
DXS-3326GSR:4#
config snmp engineID
Purpose Used to configure a name for the SNMP engine on the Switch.
41