DXS-3326GSR Stackable Gigabit Layer 3 Switch
To enable RMON:
DXS-3326GSR:4#enable rmon
Command: enable rmon
Success.
DXS-3326GSR:4#
disable rmon
Purpose Used to disable RMON on the Switch.
Syntax
disable rmon
Description
This command is used, in conjunction with the enable rmon
command above, to enable and disable remote monitoring
(RMON) on the Switch.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example Usage:
To disable RMON:
DXS-3326GSR:4#disable rmon
Command: disable rmon
Success.
DXS-3326GSR:4#
55
To Next Page
Loading...
