D-Link Nuclias DNH-100

Nuclias Connect Software User Manual Nuclias Connect Conguration
Page 67
Nuclias Connect Conguration Prole Settings
Access Policy
D-Link switches support 802.1X authentication, MAC authentication and port security to prevent unauthorized client from ac-
cessing the network. Navigate to Conguration > Prole Setting > Site > Network > Switch > Your Device > Access Policy
to congure the settings.
In the Policy Name eld, enter a name for the policy. In the Remote RADIUS Server section, specify up to 3 RADIUS Servers
for the switches to forward access requests. Authentication requests will be processed by each of the RADIUS servers in the or-
der that they are submitted. Click Select to select existing RADIUS servers created via the RADIUS Server page. A pop window
will be presented to conrm your selection. Click OK to conrm, or Cancel to close the window.
Once the RADIUS Servers is selected, a summary of the RADIUS servers will be listed in the table. In the Action eld, click
to
move the entry up, click to move the entry down. Click to delete the entry.
In the Access Policy Type eld, select 802.1x Port Based. This will allow only one user to be authenticated per port by a re-
mote RADIUS server.
In the Guest VLAN eld, specify a guest VLAN ID or disable it from the drop-down menu. The VLAN ID range is 1 to 4094. One
switch only supports one Guest VLAN. When a VLAN ID is selected, the member port information will be presented. Click the
number to be directed to the Port Settings page
In the Switch Ports eld, the number of switch ports that’s applying to the policy is listed. Click the numbers to be directed to
the Port Settings page.
Switch