D-Link Nuclias DNH-100

Nuclias Connect Software User Manual Nuclias Connect Conguration
Page 88
System GeneralSettings
The Settings page displays General, Connection, SMTP, Backup & Restore, Firmware Update, System Operation, Single-Sign-On
(SSO) information, Alerts, and FOTA.
The General tab displays customizable system settings, which includes adding a logo and enabling the captcha feature. Device
time and date and live packet interval settings are also available.
In the Customized Setting section, the following parameters can be congured:
Parameter Description
Device Name Enter a description to set the device name.
Logo Click Browser to select a le to be used as the interface
logo. A local le can be selected by using the browse
function or by dragging and dropping a le into the
frame. Supported le types include PNG or JPG images.
Login Captcha Click the drop-down menu to enable or disable the
login Captcha function.
In the LAN Settings section, the device connection parameters can be congured. These settings allow the management
computer to connect to the device.
Parameter Description
Get Address From Click the drop-down menu to choose whether the
DNH-100 will get an IP address from a DHCP server
or to manually set a static IP address. By default it
is set to Static IP Address. Note: DHCP server is not
recommended.
IP Address If the above is set to Static IP address, specify an IP
address for the DNH-100.
Subnet Mask Specify a subnet mask for the device.
Gateway Specify a gateway mask for the device. (Optional)
Primary DNS Specify a primary DNS for the device. (Optional)
Secondary DNS Specify a secondary DNS for the device. (Optional)
In the Date and Time section, the time and date of the device can be congured. It is recommended that an NTP server is used;
log and schedule settings are dependent on correct time and date congurations.
Parameter Description
Time Zone Click the drop-down menu to select the time zone.
NTP Check to enable use of NTP server(s) to manage
device’s date and time.
NTP Server 1 Specify the NTP Server’s address.
NTP Server 2 Specify the secondary NTP Server’s address.
Nuclias