D-Link Nuclias DNH-100

Nuclias Connect Software User Manual Nuclias Connect Conguration
Page 92
System Settings Backup & RestoreNuclias
The Backup & Restore tab displays customizable settings for backing up conguration settings or logs.
Navigate to System > Settings and click on the Backup & Restore tab to congure the settings.
In the Auto Log Backup Settings section, parameters regarding auto backup can be congured:
Parameter Description
Auto Backup Click on drop-down list to enable or disable auto backup.
External Syslog
Server
Enter the external syslog’s IP address or domain name.
In the Backup Settings section, device conguration and logs can be backed up, and downloaded to a local hard drive or
USB, or deleted:
Click
to backup the conguration le or log les.
Click
to download the backup le to either the management computer’s hard drive or a USB drive.
Specify the following parameters from the pop-up window, then click Download to download the le or Cancel to exit from
the operation.
Parameter Description
To Choose either My Computer or USB Disk to download your
backup le to.
All Backup Files A list of all backup les that are available to be downloaded
will be displayed. Select the radio button of the le you
want to download.