EasyManuals Logo

D-Link Wireless N User Manual

D-Link Wireless N
153 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #40 background imageLoading...
Page #40 background image
35D-Link DIR-815 User Manual
Section 3 - Conguration
Maximum Idle
Time:
DNS Servers:
MTU:
MAC Address:
Enter a maximum idle time during which the Internet connection is maintained during inactivity. To disable this feature, enable
Auto-reconnect.
Enter the Primary and Secondary DNS Server Addresses (Static L2TP only).
Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specic ISP. 1454 is the default
MTU.
The default MAC Address is set to the Internet ports physical interface MAC address on the Broadband Router. It is not recommended
that you change the default MAC address unless required by your ISP. You can use the Clone Your PC’s MAC Address button to
replace the Internet ports MAC address with the MAC address of your Ethernet card.
Click the Save Settings button to save any changes made.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the D-Link Wireless N and is the answer not in the manual?

D-Link Wireless N Specifications

General IconGeneral
Frequency Band2.4 GHz
Wireless SpeedUp to 300 Mbps
SecurityWPA, WPA2, WEP
FirewallNAT
Ports4 x 10/100 Mbps LAN, 1 x 10/100 Mbps WAN

Related product manuals