89D-Link DIR-815 User Manual
Section 3 - Conguration
Time
The Time window allows you to congure, update, and maintain the correct time on the internal system clock. From this section
you can set the time zone that you are in and set the Time Server. Daylight Saving can also be congured to automatically
adjust the time when needed.
Click the Save Settings button to save any changes made.
Displays the current date and time of the router.
Select your Time Zone from the drop-down menu.
To select Daylight Saving time manually, select enabled
or disabled, and enter a start date and an end date for
daylight saving time.
NTP is short for Network Time Protocol. A NTP server will
synch the time and date with your router. This will only
connect to a server on the Internet, not a local server.
Check the box to enable this feature.
Enter the IP address of a NTP server or select one from the
drop-down menu.
To manually input the time, enter the values in these elds
for the Year, Month, Day, Hour, Minute, and Second and
then click Set Time.
You can also click Copy Your Computer’s Time Settings
to synch the date and time with the computer you are
currently on.
Time:
Time Zone:
Enable Daylight
Saving:
Enable NTP Server:
NTP Server Used:
Manual:
To Next Page
Loading...
Need help?
General
