72D-Link DIR-815 User Manual
Section 3 - Conguration
Network Filter
Select Turn MAC Filtering OFF, Turn MAC Filtering ON
and ALLOW computers listed to access the network,
or Turn MAC Filtering ON and DENY computers listed
to access the network from the drop-down menu.
Check the box on the left side to enable the Network
Filter.
Enter the MAC address you would like to lter.
To nd the MAC address on a computer, please refer to
the Networking Basics section in this manual.
Select a DHCP client from the Computer Name drop-
down menu and click << to copy that MAC Address.
The schedule of time when the Network Filter will be
enabled. The schedule may be set to Always, which will
allow the particular service to always be enabled. Click
the New Schedule button to create your own schedule.
Congure MAC
Filtering:
Enable Checkbox:
MAC Address:
DHCP Client List:
Schedule:
Use MAC (Media Access Control) Filters to allow or deny LAN (Local Area Network) computers by their MAC addresses from
accessing the network. You can either manually add a MAC address or select the MAC address from the list of clients that are
currently connected to the Broadband Router.
Click the Save Settings button to save any changes made.
To Next Page
Loading...
Need help?
General
