D-Link Wireless N User Manual

86D-Link DIR-815 User Manual
Section 3 - Conguration
IPv6 Firewall
The DIR-815’s IPv6 Firewall feature allows you to congure which kind of IPv6 trac is allowed to pass through the device. The
DIR-815’s IPv6 Firewall functions in a similar way to the IP Filters feature.
Check the box on the left side to enable the IPv6 rewall
rule.
Enter a name to identify the IPv6 rewall rule.
Use the radio buttons to Allow or Deny transport of the
IPv6 data packets according to the criteria dened in the
rewall rule.
Use the Source drop-down menu to specify the interface
that connects to the source IPv6 addresses of the rewall
rule.
Enter the source IPv6 address range in the adjacent IP
Address Range eld.
Use the Dest drop-down menu to specify the interface
that connects to the destination IP addresses of the
rewall rule.
Enter the destination IPv6 address range in the adjacent
IP Address Range eld.
Enable Checkbox:
Name:
Action:
Source:
Dest:
Use the drop-down menu to select the time schedule that the IPv6 Firewall Rule will be enabled on. The schedule may be set to
Always, which will allow the particular service to always be enabled. You can create your own times in the Tools > Schedules section.
Select the protocol of the rewall port (All, TCP, UDP, or ICMP).
Enter the rst port of the range that will be used for the rewall rule in the top port range eld and enter the last port in the eld
underneath.
Select Schedule:
Protocol:
Port Range:
Click the Save Settings button to save any changes made.

D-Link Wireless N Specifications

General

Brand	D-Link
Model	Wireless N
Category	Wireless Router
Language	English