EasyManuals Logo

D-Link Wireless N User Manual

D-Link Wireless N
153 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #44 background imageLoading...
Page #44 background image
39D-Link DIR-815 User Manual
Section 3 - Conguration
802.11n/a (5GHz)
Check the box to enable the wireless function. If you do
not want to use wireless, uncheck the box to disable all
the wireless functions.
Select the time frame that you would like your wireless
network enabled. The schedule may be set to Always. Any
schedule you create will be available in the drop-down
menu. Click New Schedule to create a new schedule.
The Service Set Identier (SSID) is the name of your wireless
network. Create a name using up to 32 characters. The SSID
is case-sensitive.
Select one of the following:
802.11a Only - Select if all of your wireless clients are
802.11a.
Mixed 802.11n and 802.11a - Select if you are using both
802.11n and 802.11a wireless clients.
802.11n Only - Select only if all of your wireless clients are 802.11n.
The Auto Channel Selection setting can be selected to allow the DIR-815 to choose the channel with the least amount of interference.
Indicates the channel setting for the DIR-815. The Channel can be changed to t the channel setting for an existing wireless network or to
customize the wireless network. If you enable Auto Channel Selection, this option will be greyed out.
Select the transmit rate. It is strongly suggested to select Best (Automatic) for best performance.
Select the Channel Width:
Auto 20/40 - This is the default setting. Select if you are using both 802.11n and non-802.11n wireless devices.
20MHz - Select if you are not using any 802.11n wireless clients.
Check this box if you do not want the SSID of your wireless network to be broadcast by the DIR-815. If the SSID is hidden, the SSID of the
DIR-815 will not be seen by Site Survey utilities so your wireless clients will have to know the SSID of your DIR-815 in order to connect to it.
Refer to Wireless Security on the next page for more information regarding wireless security.
Enable Wireless:
Schedule:
Wireless Network Name:
802.11 Mode:
Auto Channel Selection:
Wireless Channel:
Transmission Rate:
Channel Width:
Visibility Status:
Wireless Security Mode:

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the D-Link Wireless N and is the answer not in the manual?

D-Link Wireless N Specifications

General IconGeneral
Frequency Band2.4 GHz
Wireless SpeedUp to 300 Mbps
SecurityWPA, WPA2, WEP
FirewallNAT
Ports4 x 10/100 Mbps LAN, 1 x 10/100 Mbps WAN

Related product manuals