D3 DesignCore RVP-TDA3 Series - Table 4. Joining the Cameras to the VIN Connections

- 14 -
www.d3engineering.com 585.429.1550
D3Engineering.com ▪ 585.429.1550
DesignCore™ TDA3x Product Family ▪ Quick Start Guide
Document No. 00C-131 ▪ Version 1.0 ▪ Release Date: 1/17/2019
CONFIDENTIAL ▪ 14
3. With the cameras mounted to the frame, use the provided cables to connect the cameras
to the RVP-TDA3x. Table 5 (below) outlines the proper sequence for joining the cameras
to the VIN connections.
Connect four 1000339 cameras to RVP-TDA3x
module.
Camera
Cable
VIN Connection
Left
1000368
VIN1
Back
1000369
VIN2
Right
1000368
VIN3
Front
1000367
VIN4
Table 4. Joining the Cameras to the VIN Connections