1.6 | program
Available only if you added the
option during purchase.
Open the door and place objects to sanitize in the basket. Only the side exposed
to UV-C will be sanitized. Run the program several times to ensure sanitizing
the object from every side.
How does it work?
For further information on the UV-C sanitization mode,
please visit our website.
Bob is not a medical device and is not intended to be used as such. Daan Tech
shall not be liable for any consequence of improper use, such as using Bob
instead of a sterilizer. Daan Tech does not provide warranty of any kind regarding
the removal of micro-organisms and viruses on objects.
You can choose between two durations for this program:
20 and 60 min.
For safety concerns, Bob shuts the UV-C rays instantly down when you
open the door. In addition, Bob’s porthole is made of a plastic type that
lets only visible light go through and blocks UV-C rays.
The UV-C program ends with the opening of the door and a signal
sound.
Please scan the QR code to check it out.
UV-C
Object to be sanitized
Side exposed to UV-C
Non-exposed side
30
UVC sanitizer
20min
60min
sans eau
28
QUICK UTILIZATION GUIDE