2 | heating eleMents
The heating disk must be cleaned thoroughly to avoid
clogging and reduced rinsing performance.
Once per month or every 30 cycles
To access the heating disc, please remove the 3 filters(see page 62).
Then remove the protection part of the heating
disc and clean it.
You then have access to the heating disc, clean
it with a non-abrasive sponge in order to avoid
damaging (scratching) the non-stick coating.
Put the protection part back in place.
Then reinsert the 3 filters.
63
QUICK MAINTENANCE GUIDE
To Next Page
Loading...
