Daan Tech Bob 2020 - Wash Cycle; How a Wash Cycle Works

Washin g
49:00
3 | Wash cycle
3.1 | How a wash cycle works
A wash cycle comprises several steps. You can follow the
progress of the current wash cycle on Bob’s home screen
You can see several information on the screen:
Icon of the current step
Current step
Icon of the current program
Remaining time
(minutes and seconds)
y Make sure that your dishes are positioned correctly in the basket, as
recommended on page 30.
y Close the door. Warning: the cycle cannot be initiated if the door is
open or not properly closed
y Check that a Bob cassette (even if empty) is correctly inserted into
the designated tray. This is Bob’s start key, without which the cycle will
not start.
y Choose the most appropriate program according to your dishes and
the degree of soiling
y Start the cycle on Bob’s colour display (see page 22).
y Fill the water tank until the signal sound occurs if your Bob is in the
water supply mode “built-in water tank”
Before starting a wash cycle
39
QUICK UTILIZATION GUIDE