Daan Tech Bob 2020 - 5 | Spray arm

Maintenance calendar
Tasks Timing Tools
Filters
After each cycle Water
Once a week or every 10
cycles
Water
Soft bristle brush
Heating elements
Once per month or every
30 cycles
Non abrasive sponge and
degreasing product
Tubes and inner
tank
Every 3 months or 90
cycles
Use a Bob rock'n'roll
cassette to thoroughly
clean your Bob.
For further information
please refer to page 64.
Plastic shell, screen
and button
Depending on the amount
of soil on Bob.
Moist wipe
Always unplug the appliance before cleaning.
60
QUICK MAINTENANCE GUIDE