If engine cannot be started or vehicle does
not move, check the followings.
●Is there fuel in fuel tank?
●Are you operating in accordance with
the instructions given in user’s manual?
●Is fuse not cut?
●Is starter motor running?
●If starter motor is not running due to
battery consumption, try starting motor
by using kick start technique.
Gear is shifted in 5-shift return system as
shown on the right side drawing.
●Close throttle grip and hold clutch lever
perfectly, and shift gear.
●Touch pedal lightly with foot and shift
gear perfectly until you hear “Click” at
the pedal. If you apply excessive force
when shifting gear, transmission may be
damaged.
<GEAR DOWN OPERATION>
If you gear down when you need to drasti-
cally accelerate speed such as when you
are passing another vehicle, speed can be
accelerated. If you ride too fast, it ad-
versely affects engine because engine rev-
olution is excessive.
19
IF ENGINE CANNOT BE STARTED
GEAR SHIFTING
CAUTION
●Exhaust gas contains harmful
substance such as carbon
monoxide. Start engine in well-
ventilated places.
●If engine is not started within 3
seconds after starter button is
pressed, wait for approximately 10
seconds and retry. This is to
recover battery voltage.
●Do not run engine idle unreaso-
nably. This not only wastes fuel but
also adversely affects engine.
●If starter button is pressed without
disengaging clutch, motorcycle
may bring out to fall. Make sure
gear is in neutral position or
disengage clutch prior to starting
engine.
GEAR CHANGE PEDAL
1
5
4
3
2
**vl125(~47P) 02.11.5 4:33 PM 페이지19
To Next Page
Loading...
