38
The following is an explanation of correct
inspection methods, cleaning and parts
replacing. Please always refer to this
section when wanting to inspect or repair
your vehicle.
MAINTENANCE PRECAUTIONS
CAUTION
●Always observe safety rules when
performing maintenance on the
vehicle.
●Choose a flat surface and make
sure the main stand is in a secure
down position.
●Use correct tools.
●Conduct engine maintenance with
the engine key out of the ignition.
●Be careful around the engine and
muffler when performing mainte-
nance as these areas can become
extremely hot.
●After self maintenance, the waste
material must be packed in the
specified container and entrusted
disposal to the authorized disposal
company.
●Exhaust gas contains harmful
substance such as carbon monoxide.
Do not carry out inspections on
vehicle in closed place, or in poorly
ventilated places, with engine
running.
WARNING
●If your motorcycle is overturned or
involved in a collision, inspect
control levers, cables, brake hoses,
calipers, accessories, and other vital
parts for damage. Do not ride the
motorcycle if damage impairs safe
operation. Have your authorized
Daelim dealer inspect the major
components, including frame,
suspension and steering parts, for
misalignment and damage that you
may not be able to detect.
●Use new, genuine Daelim parts or
their equivalent for maintenance
and repair. Parts which are not of
equivalent quality may impair the
safety of your motorcycle and the
effective operation of the emission
control systems.
FRAME AND ENGINE NUMBERS
The frame and engine numbers are needed
when registering motorcycle or when
ordering parts.
●Frame number is stamped on the right
side of steering head.
●Engine number is stamped on left crank
case.
FRAME NUMBER
ENGINE NUMBER
**vl125(~47P) 02.11.5 4:34 PM 페이지38
To Next Page
Loading...
Need help?
General
