·Be sure to turn the ignition switch OFF
when replacing the bulb.
·Do not use bulbs other than that
specified.
·After installing a new bulb, check that
the light operates properly.
[HEADLIGHT BULB]
① Loosen the washer screw and remove
the headlight.
② Pull off the socket without turning.
③ Loosen the spring and remove the
headlight bulb.
④ Install a new bulb in the reverse order
of removal.
HEADLIGHT BULB : 12V 35/35W
42
BULB REPLACEMENT
WARNING
●The light bulb becomes very hot
while the light is ON, and remain
hot for a while after it is turned
OFF. Be sure to let it cool down
before servicing.
CAUTION
●Do not put finger prints on the
headlight bulb, as they may create
hot sports on the bulb and cause it
to break. Wear clean gloves while
replacing the bulb.
If you touch the bulb with your
bare hands. clean it with a cloth
moistened with alcohol to prevent
its early failure.
HEADLIGHT
HEADLIGHT BULB
MARKER LIGHT
BULB
SOCKET
**vl125(~47P) 02.11.5 4:34 PM 페이지42
To Next Page
Loading...
Need help?
General
