[TAIL/STOPLIGHT BULB]
① Loosen the tapping screw and remove
the taillight lens.
② Slightly press down on the bulb and
turn it counterclockwise.
③ Install a new bulb in the reverse order
of removal.
TAIL/STOPLIGHT BULB:12V 21/5W
[LICENSE LIGHT BULB]
① Loosen the tapping screw and remove
the license light lens.
② Slightly press down on the bulb and
turn it counterclockwise.
③ Install a new bulb in the reverse order
of removal.
LICENSELIGHT BULB: 12V 5W
[FRONT/REAR WINKER BULB]
① Loosen the tapping screw and remove
the winker lens.
② Slightly press down on the bulb and
turn it counterclockwise.
③ Install a new bulb in the reverse order
of removal.
WINKER BULB : 12V 10W
43
TAIL & STOP BULB
TAILLIGHT
LENS
TAPPING
SCREWS
MARKER LIGHT BULB
LICENSE LIGHT
LENS
TAPPING
SCREWS
WINKER LENS
WINKER
BULB
TAPPING
SCREW
**vl125(~47P) 02.11.5 4:34 PM 페이지43