LIGHT SWITCH
To turn the lights on or off, twist the knob
on the end of the combination switch le-
ver.
There are three positions:
turn~
I1~
~~
"OFF" position
All lights are off.
~O0::: position
Parking, tail, license plate and instrument
panel lights are illuminated.
~O~Oposition
~
-
Headlight(low beam) and all the above
lights are illuminated.
Head lamp warning chime
The chime sounds to remind you to turn
off the lights if they are left on when the
ignition switch is turned to the "8" or the
"I" position.
The asymmetrical low beam increases
the field of vision on the left-hand side
of the lane.
When driving in countries which drive
on the right, the 15° section of the
headlamp lenses must have a black
cover strip applied.
3-13
TURN SIGNAL SWITCH
Move this lever up or down to the stop
position to engage indicator turn signals.
tJ right
o
~~
~~~
~ left ~
The indicator turn signals will cancel after
the turn is completed when the lever
returns to its normal position.
When lane changing, move the switch part
way to first stop. When released, the
switch will spring back to the normal
position.
To Next Page
Loading...
