Daewoo Espero - Reading Lamp; Licence Plate Lamp; Reversing Lamp

READING LAMP
1. Prise the lamp out of the recess, using
a screwdriver.
2. Press the spring clip slightly and re-
move the bulb.
3. After replacing with the new bulb,
install the lamp housing.
LICENCE PLATE LAMP
1. Rotate and disengage the socket by
hand.
2. Remove the licence plate lamp.
3. Remove the bulb from the socket.
4. Replace with new bulb.
~. ----
8-21
REVERSING LAMP
1. Unscrew the two bolts and remove the
reversing lamp.
2. Rotate the bulb holder anticlockwise
and remove.
3. Rotate the bulb clockwise and remove.
4. Press the new bulb slightly. Rotate
anticlockwise and insert.
5. Rotate the bulb holder clockwise and
insert.