HIGH BEAM SWITCH
To illuminate the high beam headlights
push the lever towards the instrument
panel.
high beam
~O
~
-
~~
low beam
The headlight high beam indicator light in
the instrument panel comes on when the
headlights are on high beam.
PASSING LIGHT SWITCH
To illuminate the high beam at any time,
pull the lever towards the steering wheel.
The lever will return to the off position
when released.
~
~ h;ghbeam
3-14
To operate the windscreen wipers, move
the lever upwards with the ignition on.
move upwards
~(HI)
\l
~
WO)
~;('S:~~.
\V \
~n=-(I-NT)
L ~~.. ~
OFF
=
Off
INT
=
Intermittent wipe
La
=
Continuous wipe, slow speed
HI
=
Continuous wipe, fast speed
CAUTION
Do not operate the wipers when the
windscreen is dry. They may scratch
the windscreen glass.
Do not operate the wipers if they are
covered with snow or frozen as this
may damage the wiper system.
To Next Page
Loading...
