EasyManua.ls Logo

Daewoo Espero - Spare Wheel, Jack, and Vehicle Tools; Wheel Changing Procedure; Wheel Changing Jacking Cautions

Daewoo Espero
114 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SPARE WHEEL, JACK AND
VEHICLE TOOLS
The spare wheel, jack and vehicle tools are
accommodated in the luggage compart-
ment.
The spare wheel is retained by a bolt under
a floor cover.
-"\
/-
--
The jack and vehicle tools are located next
to the spare wheel in a special compart-
ment.
WHEEL CHANGING
In order to reduce the chance of possible
injuries when changing a wheel, note the
following procedure and observe all refer-
ences:
Park on a firm, level surface wherever
possible.
Switch on the hazard warning
flashers and apply the hand brake.
Place the automatic transmission
selector lever in position "P", or with a
manual transmission engage first gear
or reverse.
Set up warning triangle if you have
one.
--:'"\t....
c:
-""\-••...••." ("'\1
7-2
With a wedge block or any available
block of wood or a rock, block the
wheel diagonally opposite the wheel
to be changed.
Use the jack only when changing
wheels.
Never crawl under a jacked-up
vehicle.
Never start or run the engine while
the vehicle is supported by jack.
No person should remain in
a
vehicle that is being jacked.
00
not jack up the vehicle on the
inclined surface.
00
not raise the vehicle with the
jack in
a
location other than under
the notch closest to the wheel you
are changing.
00
not get bodily under a vehicle
that is supported only by a jack:
use vehicle support stands.

Table of Contents

Related product manuals