Daewoo Espero - Audio System Controls (Part 1)

1. On-offNolume control knob
(push button)
• Power on-off
Press this knob to switch on the
audio system and press again to
switch off the audio system.
• Volume-Control
Turn this knob clockwise to increase
the volume.
Turn this knob anticlockwise to
reduce the volume.
2. Fader control knob
The ring (fader knob) behind on-off/
volume control knob controls the front
and rear speaker volume.
Turn clockwise to increase front
speaker volume, anticlockwise to in-
crease rear speaker volume. When
the ring is set in the click position, the
balanced volume of 4-speakers is
heard.
3. Tone control knob
Turn clockwise to increase tone, anti-
clockwise to decrease tone.
4. Balance control knob
Turning the knob to the left or right con-
trols the left and right speaker volume.
Adjust sound balance of right and left
speakers for best stereo effect.
5. FM/AM/LW selector button
Press this button to select FM1, FM2,
AM or LW band.
Band changes as follows;
I > FM1 .,. FM2 .,. AM .,. LW I
6. Auto memory button
When this button is pressed more than
2 seconds after selecting band, auto
memory store starts and stations are
automatically searched for in increas-
ing frequency from the currently
received station, and stored into the
pre-set station buttons 1 th rough to 6
in sequence. After storing 6 stations,
this function automatically resets to
pre-set scan function, so that the pre-
set stations are tuned in successively
for 5 seconds each.
When the desired station is tuned in,
press the corresponding pre-set sta-
6-3
tion button in order to release the pre-
set scan function.
When you use this auto memory func-
tion, the previously memorized stations
are erased.
7. Eject button
Press the button to eject the cassette
tape.
8. Cassette slot
Switch the radio on and push the cas-
sette fully into the slot with the tape
facing the right. Power is automatically
transferred from the radio to the
cassette system, then the cassette will
how play.
9. Fast rewind button
Press this button to fast rewind the
tape.
Press the "fast forward button" slightly
to stop the fast rewind movement.
10. Fast forward button
Press the button to fast forward the
tape.
Press the "fast rewind button" slightly
to stop the fast forward movement.