FRONT 4–17
13.Apply the deadner.
• Clean the passenger compartment.
• Apply the deadner to the surface of floor panel.
Fig. 25
14.Install the related parts.
• Clean the passenger compartment.
• Wiring harness and related parts.
• Parts of the passenger compartment.
• Chassis components.
• Parts of the front compartment.
• Hood, radiator grill, and bumper.
• Other.
• Install in the reverse order in which they were re-
moved.
NOTE: After install the all related parts, rub in grease
to the moving parts and replenish cooling liquid,
break oil, aircon gas and others.
15.Check and adjust
• Measure the front wheel alignment.
• Check clearances and level differences.
• Check the hood locking and unlocking condition.
• Adjust the head lamp aim.
• Check all operation.
• Check for gas, oil and liquid leaks.
• Check for water leaks in the passenger compart-
ment.
NOTE: Use specified check sheet for operation
check properly.
LEFT SIDE ONLY
To Next Page
Loading...
