7–2 FENDER, HOOD AND TRUNK LID
1. FENDER
1-1. REPAIR PROCEDURE
1. Remove the related parts.
• Radiator grill and front bumper.
• Mud guard and fender liner.
2. Remove the fender
3. Preparation of the new fender.
• Preparation of the new fender and check dam-
aged areas.
4. Apply the paint.
CAUTION
• Ventilate when spraying paint. Most paint contains
substances that are harmful if inhaled or swal-
lowed. Read the paint label before opening paint
container.
• Avoid contact with skin. Wear an approved res-
pirator, gloves, eye protection and appropriate
clothing when painting.
• Paint is flammable. Store in a safe place, and
keep it away from sparks, flames or cigarettes.
Fig. 1
5. Coating the anti-rust agents.
• Coating the anti-rust agents to door hinge areas.
Fig. 2
To Next Page
Loading...
