6–6 FRAME DOOR OPENING, DOOR AND SIDE PANEL OUTER
2. DOOR
2-1. REPAIR PROCEDURE
1. Remove the related parts.
• Door trim and related parts.
• Wiring harness and solenoid valve.
• Glass and window lifter.
• Linkage, lock set and handle.
• Others.
NOTE: Inspection and choose the usable parts.
2. Remove the door.
• Remove the bolt from door check hinge(1) and re-
move the four bolts from door assembly(2).
Fig. 7
• Check and adjust the clearances and level differ-
ences of doors, fender, pillar, roof and side panel
outers.
• Check any deformation.
5. Remove the new door.
• Remove the four bolts from door assembly.
6. Apply the paint.
CAUTION
• Ventilate when spraying paint. Most paint contains
substances that are harmful if inhaled or swal-
lowed.
Read the paint label before opening paint con-
tainer.
• Avoid contact with skin. Wear an approved respi-
rator, gloves, eye protection and appropriate cloth-
ing when painting.
• Paint is flammable. Store in a safe place, and keep
it away from sparks, flames or cigarettes.
8. Coating the anti-rust agents.
• Coating the anti-rust agents to the inside of bot-
tom areas.
3. Preparation of the new door.
• Preparation of the new door and check damaged
areas.
4. Preinstall the door.
• Fix the four bolts.
Fig. 8
To Next Page
Loading...
