FRAME DOOR OPENING, DOOR AND SIDE PANEL OUTER 6–5
9. Apply the undercoat.
• Undercoat to the front floor.
10.Apply the paint.
CAUTION
• Ventilate when spraying paint. Most paint contains
substances that are harmful if inhaled or swal-
lowed.
Read the paint label before opening paint con-
tainer.
• Avoid contact with skin. Wear an approved res-
pirator, gloves, eye protection and appropriate
clothing when painting.
• Paint is flammable. Store in a safe place, and
keep it away from sparks, flames or cigarettes.
11.Coating the anti-rust agents.
• Coating the anti-rust agents to the inside of frame
door opening areas sufficiently.
12.Install the related parts.
• Clean the passenger compartment.
• Wiring harness and related parts.
• Seat belt assembly and carpet.
• Trims and weather strips.
• Door and others.
• Install in the reverse order in which they were re-
moved.
13.Check and adjust.
• Check clearances and level differences.
• Check the door locking and unlocking condition.
• Check for water leaks in the passenger compart-
ment.
Fig. 6
WHOLE AREA OF
SIDE TUNNEL
INSERT THE SPRAY GUN NOZZLE THROUGH
THIS HOLES FOR COATING
To Next Page
Loading...
