FENDER, HOOD AND TRUNK LID 7–5
• Close the hood and check the front and rear clear-
ances and level difference of hood, fender and
head lamps.
Fig. 7
6. Tighten fully.
• After checking and adjusting the mounting posi-
tion, tighten all bolts fully.
7. Install the related parts.
• Washer hose and nozzles.
• Install in the reverse order in which they were re-
moved.
8. Check and adjust.
• Check clearances and level differences.
• Check the hood locking and unlocking condition.
• Check spray conditions of washer liquid and ad-
just washer spray nozzles on the hood panel.
To Next Page
Loading...
