Local Configurations 173
Select the Send Email check box to enable the system to send an
email notification when an alarm event occurs.
To use this function, make sure the email function is enabled in Main
Menu > NETWORK > EMAIL.
Select the check box to activate a buzzer noise at the Device.
Select the check box to enable the Device to record a local alarm log.
Select to enable audio broadcast/voice prompts in response to a user
account alarm event.
Table 5-43
Click Apply to complete the settings. Step 3
5.10.5.4 Configuring Device Event Settings
Select Main Menu > ALARM > ABNORMITY > Device. Step 1
The Device interface is displayed.
In Event Type drop-down list, select Network Security Exception. See Figure 5-140. Step 2
Figure 5-140
(Optional) In Event Type drop-down list, select Battery Low Space. See Figure 5-141. Step 3
To Next Page
Loading...
Need help?
General
