Dahua Technology LS UCM-EF Series - Contrast; Brightness

Interface Configuration 17
 You can only adjust contrast, brightness, saturability, and acutance in the User
Mode.
4.1.2 Contrast
You can adjust the luminance or color of images to make objects in images distinguishable by
adjusting contrast.
Step 1 Select Image > Contrast.
The Contrast interface is displayed. See Figure 4-4.
Figure 4-4 Contrast
Step 2 Adjust the Contrast by the left and right buttons on the remote control according to your
requirement.
The range of contrast is 0–100.
4.1.3 Brightness
You can adjust the brightness of images.
Step 1 Select Image > Brightness.
The Brightness interface is displayed. See Figure 4-5.
Figure 4-5 Brightness
Step 2 Adjust the brightness by the left and right buttons on the remote control according to
your requirement.
The range of brightness is 0–100.