Interface Configuration 23
Step 2 Adjust phase by the left and right buttons on the remote control according to your
requirement.
Auto Adjust
The position of video wall can be automatically adjusted.
Step 1 On the Gemetry menu, select Auto Adjust.
The Auto Adjust interface is displayed. See Figure 4-16.
Step 2 Press Menu on the remote control, and then the position of the screen will be
automatically adjusted.
On the main menu, press the left and right direction buttons until the Sound interface is
displayed.
Step 1 Press the left and right direction buttons on the remote control to select Sound.
The Sound interface is displayed. See Figure 4-17.