Dahua Technology LS UCM-EF Series - Color Temperature; Aspect Ratio

Interface Configuration 19
4.1.6 Color Temperature
You can adjust color temperature of images.
Step 1 Select Image > Color Temperature.
The Color Temperature interface is displayed. See Figure 4-8.
Figure 4-8 Color temperature
Step 2 Adjust color temperature by the left and right buttons on the remote control according to
your requirement.
 Color temperature has four types: cool, standard, warm, and personal.
 Only in user mode can you adjust the value of red, green, and blue.
4.1.7 Aspect Ratio
Display scales can be adjusted by adjusting aspect ratio.
Step 1 Select Image > Aspect Ratio.
The Aspect Ratio interface is displayed. See Figure 4-9.
Figure 4-9 Aspect ratio
Step 2 Select Aspect Ratio by the up and down buttons on the remote control according to
your requirement. For parameters of zoom mode, see Table 4-2.
Table 4-2 Parameters of zoom mode
Parameter
Descriptions
Auto
Display scales are automatically adjusted.
4:3
Images are displayed on the scale of 4:3.