Dahua ASA2212A - System Operation; Attendance Process

3 System Operation
Note:
 Fingerprint record is in Appendix 1.
 Input of text is in Appendix 2.
3.1 Attendance
Warning:
During attendance, please DO NOT change system config, system time or power off the
device, since these will cause abnormal attendance.
Plug the device to power, device boots up and shows time info, see Figure 3-1.
Note:
If you did not operate over 45s in one page, it will return to standby page.
Figure 3-1
 Click number key, see Figure 3-2. Enter user ID and password can pass attendance.