Figure 3-49
Step 3. Click or to select number position. Enter numberkey, see Chart 3-8.
DHCP（Dynamic Host Configuration Protocol）.
Enable DHCP, auto get IP address. Now IP address, subnet mask
and gateway are not available.
When DHCP is disabled, you set IP address, mask and gateway. IP
address and gateway must be in the same segment.
Chart 3-8
Step 4. Click to save.
3.9 USB
Warning:
Export user info and before updating, make sure USB is inserted. During exporting
or upgrafing, DO NOT eject USB disk or operate device, otherwise export or
updating will fail.
Enter main menu, click or to select USB, click . Or directly click number
key 2, see Figure 3-50.
Figure 3-50
3.9.1 Export User Info
Select USB>Export User Info, click to enter, and click to export.
Note:
To Next Page
Loading...
