Dahua DHI-ASI7213Y-V3-T1P - Page 30

22
IP address configuration
Table 3-6 IP configuration parameters
Parameter Description
IP Address/Subnet
Mask/
Gateway IP
Address
The IP address, subnet mask, and gateway IP address should be on the
same network segment. After configuration, tap
to save the
configurations.
DHCP
DHCP (Dynamic Host Configuration Protocol).
When the DHCP is enabled, the IP address can be automatically acquired,
and the IP address, subnet mask and gateway IP address cannot be
manually configured.
P2P
P2P is a private network traversal technology which enables user to
manage devices without requiring DDNS, port mapping or transit server.
Make sure that the computer used to log in to the web is in the same LAN with the device.
3.9.1.2 Active Register
By active registering, you can connect the access controller to the management platform, and then
you can manage the access controller through the management platform.
Configurations you have made can be cleared on the managing platform, and the access controller
can be initialized, you need to protect the platform managing permission in case of data loss caused
by improper operation.
For active register parameter, see Table 3-7.
Table 3-7 Active register
Name Parameter
Server IP Address IP address of the managing platform.
Port Port number of the managing platform.
Device ID Subordinate device number on the managing platform.