Dahua DHI-ITC215-PW6M-IRLZF-B - Plate Overlay; Setting Blocklist and Allowlist; Allowlist

25
2.5.1.4.2 Plate Overlay
You can select whether to overlap the plate image onto the snapshot, and set the overlap position
and size.
Step 1 Select
Setting
>
ITC
>
Cutout
>
Plate Overlay
.
Step 2 Configure parameters.
Figure 2-31 Plate overlay
Step 3 Click
Confirm
.
2.5.1.5 Setting Blocklist and Allowlist
2.5.1.5.1 Allowlist
Add vehicles into the allowlist and if the barrier control is set to
Allowlist Open (Camera)
, only
vehicles on the allowlist can pass.
Procedure
Step 1 Select
Setting
>
ITC
>
Allowlist
>
Blocklist and Allowlist
.
Step 2 Enter a plate number and then click
Search
.
If the plate is on the allowlist, its detailed information will be displayed.
Directly click
Search
to display all records on the allowlist.
Figure 2-32 Allowlist