50
Figure 2-64 Info push platform
Table 2-25 Info push description
Section Parameter Description
Basic configuration
Keep Alive Circle
Update interval of the connection between the
server and the device.
Max Keep-alive Request
Set the maximum number of heartbeats of the
connection between the server and the device.
When the set number is exceeded, the device
has disconnected.
Data Type Select the data type to be uploaded.
Uploading Info Select the specific information to be uploaded.
Picture Config
Filter Condition
Select whether to upload information of
unlicensed vehicles.
Upload Type Select the type of pictures to be uploaded.
Step 3 Click
Confirm
.
2.5.4 Event
This section provides guidance on configuring alarm, and abnormality.
2.5.4.1 Alarm
2.5.4.1.1 Relay Activation
You can set several parameters of relay activation such as relay-in, period, anti-dither, and sensor
type. When an alarm is triggered, the system sends the alarm signal to external devices to trigger, for
example, buzz.
Step 1 Select
Setting
>
Event
>
Alarm
>
Relay Activation
.
To Next Page
Loading...
