Dahua DHI-ITC215-PW6M-IRLZF-B - Configuring TCP;IP; Configuring Port

43
2.5.3.1 Configuring TCP/IP
Configure the IP address of the Camera, and DNS server so that the Camera can connect with other
devices in the same network.
Some models support dual network port. Do not set them in the same network segment; otherwise
it might cause network error.
Step 1 Select
Setting
>
Network
>
TCP/IP
.
Step 2 Configure parameters based on the actual situation.
Figure 2-54 TCP/IP
Step 3 Click
Confirm
.
2.5.3.2 Configuring Port
You can set the maximum number, and value of the ports.
Step 1 Select
Setting
>
Network
>
Connection
>
Port
.
Step 2 Set the maximum number of connections of the Camera, and then configure each port.
Figure 2-55 Port
Step 3 Click
Confirm
.