65
8. Click
Next
.
Figure 2-86 Completing certificate import wizard
9. Click
Finish
.
Figure 2-87 Security warning
10. Click
Yes
, and then click
OK
on the pop-up window.
●
If you select
install signed certificate
, follow the steps below.
1. Select
Setting Safety
>
System
>
Safety
>
HTTPS
.
2. Select
Enable HTTPS
, and
Compatible with TLSv1.1, and earlier versions
.
3. Click
Browse
to upload the signed certificate, and certificate key, and then click
Upload
.
4. To install the root certificate, see operation steps from 1.d to 1.j in
Create
Certificate
.
Step 2 Select
Enable HTTPS
, and click
Confirm
.
The configuration takes effect until the Camera restarts.
To Next Page
Loading...
