41
Window split display Figure 4-26
4.3.4.4 Refreshing Video Wall
Click to refresh channel preview and layout information of current video wall.
4.3.4.5 Clearing Screen
Click to clear screen.
4.3.4.6 Screen Management
You can manage the screen, including controlling screen power, controlling power switch and
adjusting screen parameters.
Only DH-LED-N protocol supports to control the power switch and adjust screen, whereas
LED-CLT protocol only supports power switch function. For screen protocol configuration,
see"4.5.5.2.1 Screen Setup."
1-channel 4K high definition (H.265) series does not support screen managemenet function at
present.
4.3.4.6.1 Screen Power
According to requirement, connect the decoder with screen serial cable correctly, so you can turn
on/off the screen. After the screen is turned off, it will be black.
Click . The Screen Power interface is displayed.
Select a screen to turn on or turn off the screen.
Select All to turn on or turn off the screens of all blocks.
Tick the check box of All, to select all screens or blocks.
To Next Page
Loading...