55
Add User Figure 4-43
Enter username, password, confirm password and note, and then select group. Step 2
When selecting a group for a user, authority of the user can only be a subset of the
group, and should be no higher than the group authority.
To conveniently manage the user, it is suggested that general user authorities shall be
lower than high-level user authorities.
In the Authority list, select operating authorities for the user. Step 3
Select the check box to enable the authority.
Select All to select all authorities.
Click OK. Step 4
Modifying User
Click corresponding to the user you want to modify. Step 1
The Modify User interface is displayed.
To Next Page
Loading...