56
Modify User Figure 4-44
Modify user information. Step 2
Default user can only modify password, rather than other information.
Click OK. Step 3
Modifying Password
Click corresponding to the user you want to modify. Step 1
Select Modify Password. Step 2
Enter old password, new password and confirm password. Step 3
Click OK. Step 4
Deleting User
Click corresponding to the user you want to delete.
4.5.1.2.2 Group
Different users may have different authorities to access the device. You can divide the users with the
same authority into one group. It is easy for you to maintain and manage the user information. You
can manage group information. Add and delete group, and modify group password. See "4.5.1.2.1
User".
Select Setup > System Config > User Management > User Management > Group. The Group
interface is displayed.
The Authority list is different depending on device model. The actual interface shall prevail.
To Next Page
Loading...